Embedded Files
簡易修改設定
簡易修改設定
1. Delete 進入 BIOS
>> F1 Advanced Mode
2. 進入BIOS後
> F9 Setup Defaults >> OK
3. F1 進入進階設定(Advanced Settings)
4. Advanced
Smart Self Test >> Disabled
Onboard LAN Option ROM >> Enabled
5. Power
Deep Power Off Mode >> Disabled
Restore On AC Power Loss >> off
6. Security
Chassis Opened Warning >> Disabled
Secure Boot >> Disabled
7. Boot Options
D2D Recovery >> Disabled
Fast Boot >> Disabled
8. F10 存檔重開後，再次進入BIOS
9. Boot Options
進入 Network Device Priority
1st Boot Device >> UEFI:PXE IPv4
2st Boot Device >> Disabled
10. Boot Priority Order
1 st Boot Device >> UEFI:PXE IPv4 I219-V
2 st Boot Device >> Phantosys LBM
※安裝本地快取後才會出現LBM，如需使用離線開機者須派送完全
11. F10 存檔
圖文解說
圖文解說
1. Delete 進入BIOS >> F1 Advanced Mode
2. 進入BIOS後 >> F9 Setup Defaults >> OK確認
3. 按下F1進入進階設定(Advanced Settings)
4. Advanced
Smart Self Test >> Disabled
Onboard LAN Option ROM >> Enabled
5. Power
Deep Power Off Mode >> Disabled
Restore On AC Power Loss >> off
6. Security
Chassis Opened Warning >> Disabled
Secure Boot >> Disabled
7. Boot Options
D2D Recovery >> Disabled
Fast Boot >> Disabled
8. F10 存檔重開後，再次進入BIOS
9. Boot Options
進入 Network Device Priority 將 IPv6 Disabled
10. Boot Priority Order
1 st Boot Device >> UEFI:PXE IPv4 Intel (R) Ethernet Connection (17) I219-V
2 st Boot Device >> Phantosys LBM
F10 存檔
※安裝本地快取後才會出現LBM，如需使用離線開機者須派送完全
Google Sites
Report abuse